473 features usb interface support protocol usb 1.1/2.0 connector usb type b receiver buffer 1000 data frames power power consumption 0.7w max. led power/firmware updating, can tx/rcv, can status for normal and error, usb tx/rcv, terminator status os driver support windows ? server 2008; 2003/vista/2000/xp/7 and linux os mechanical casing aluminum case dimension 70 mm (w) x 110 mm (d) x 30 mm (h) (2.75" (w) x 4.33" (d) x 1.18" (h)) weight 0.25 kg (0.55 lb) installation din-rail and panel mount environment operating temperature -40 c to +70 c (-40 f to +167 f) storage temperature -40 c to +85 c (-40 f to 185 f) humidity 5% ~ 95% (non-condensing) emission compliance ce class a, fcc class a can interface connector 9-pin male d-sub isolation 3 kvrms for dc-dc and photocoupler receive buffer 1000 data frames nvram 64kbyte for users define max data flow 10000 fps (can bus) support protocol can 2.0a/2.0b terminator resistor software configurable baud rate 5k,10k, 20k, 40k, 50k, 80k, 100k,125k, 200k, 250k, 400k, 500k, 600k, 800k ,1mbps and user defined ICON-101CU 1-port can to usb industrial converter (-40 c ~ +70 c) full compliance with usb 1.1/2.0 (fully speed) full compliance with can 2.0a and can 2.0b d-sub db9 can port supports 3kv isolation easily setup to can terminator by software configuring can transmission speed up to 1mbps powered by the usb bus usb type b connector complies with class 1, div ii minimum withdrawal requirement of 15n provides din-rail mounting, status led indicators driver supports windows server 2008; 2003/vista/2000/xp/ 7 and linux os -40c ~ +70c wide temperature operating suitable for industrial automation and power automation field applications specifications introduction the can (controller area network) is a serial bus system and is usually used in structuring intelligent industrial device networks and building smart automatic control systems. the ICON-101CU is a cost-efficient industrial converter for pairs to pc using the standard usb interface. it supports can monitor tool and displays the can message received in decimal or hex mode. this converter shows the time stamp of each receiving message. the gui management program and programming guide both are ready for use. the can host, monitor or hmi can access & control can device through ICON-101CU. operating systems support includes windows ? 98/me/2000/xp. ext. temp * all specifications and photos are subject to change without notice.
overview embedded systems embedded systems for transportation embedded field controllers industrial firewall digital signage solutions 474 can network ICON-101CU can device can device can device usb ordering information dimensions ICON-101CU 1-port can to usb industrial converter axiomtek.com ? 2016 axiomtek co., ltd. all rights reserved. * all specifications and photos are subject to change without notice. embedded microboxes industrial barebone systems industrial chassis backplanes power supplies peripherals & accessories 11
|
